Macro

A Macro is a way to execute a sequence of commands that are commonly used. They can be used to cast spells, activate job abilities or weapon skills, use a pet command, change equipment, notify players in a text channel, or display information to yourself. Every character gets 40 Macro Books which consist of 10 Macro Sets. Each Macro Set has 20 Macros that can be filled with one to six macro commands.

Macros

Saving, Loading, and Deleting Macros It is possible to save, load, and delete macro and equipment sets data to a server for safe storage. This allows you to transfer your macro and equipment sets data to other computers or to restore it if it is lost somehow. It is highly recommended that you save to the server, in case something happens to your hard drive. All saving, loading, and deleting occurs on the character screen while your character's name is highlighted. You can access the Settings Management window in the top right by pressing the + key on the numpad of your keyboard (F key if using compact keyboard controls). To delete all of your saved data on the server, you can use the following commands: Keyboard: Shift + Alt + Ctrl + D Controller: RB + LB + right stick button + left stick button

Settings Management

Copying a Macro Set

• To copy a macro set (one of the groups of 20 Macros within a Macro book):
  • Start editing a macro book.
  • Press the numpad + key or F key to select the Options sub-menu which has the options Copy, Paste, Delete. Paste will be disabled until you have copied a macro.
  • Hold down ctrl or alt for 2 seconds, then the Help text at the top of the screen will change to "Copy/Paste/Delete Macro Set".
  • While still holding down ctrl or alt, press enter to make your selection.

Macro Hotkeys

Hotkey	Function
(Ctrl or Alt) + [0-9]	Execute a macro
(Ctrl or Alt) + Up Arrow or Down Arrow	Cycle through macro sets.
(Ctrl or Alt) + Shift + [0-9]	Change the current macro set.
(Ctrl or Alt) + Left Arrow or Right Arrow	Macro selection.
(Ctrl or Alt) + Enter or 'Y' Key	Execute selected macro.

Macro Commands

The following are common commands that are used in macros. The wait command is usually critical in macros. You do not need a wait after performing /equipset, but you do need a wait after performing an action (such as /ja, /ma, /ws). Quotation marks are optional when referencing a single-word ability, weapon skill, spell, etc..

Perform action commands

Macro Command	Used for	Example
/ma	Casts a spell	/ma "Cure" <t>
/ja	Uses a job ability	/ja "Berserk" <me>
/ws	Uses a weapon skill	/ws "Shark Bite" <t>
/ra	Uses a ranged attack	/ra <t>
/pet	Uses a pet command	/pet "Predator Claws" <t>
/item	Uses an item	/item "Echo Drops" <me>
/attack	Engages targetted enemy NPC	/attack <t>
/target	Targets an object	/target PlayerName
/targetnpc	Targets closest NPC	/targetnpc
/targetbnpc	Targets closest enemy NPC	/targetbnpc
/lockon	Locks player's view and direction to current selected target	/lockon
/check	Examines a player or monster	/check PlayerName
/lastsynth	Performs the last synthesis you did	/lastsynth
/assist	Changes your target to the what the person you're assisting is attacking	/assist TheTank

Equipment and macro changing commands

Macro Command	Subcommands	Used for	Example
/equip	[area (main, sub, range, ammo, head, neck, L.ear, R.ear, body, hands, L.ring, R.ring, back, waist, legs, feet)] ["item name"] [storage number (0-8)]	Equips a piece of gear to specified area. To unequip, omit the item name. Specifying a storage number will limit equipment to the Mog Wardrobe number selected (Inventory=0)	/equip head "Destrier Beret"
/equipset	[set number] [options (echo,<blank>)]	Equips a gear set. Displays resultant text if "echo" option is specified; options can be blank.	/equipset 18
/macro	[options (set, book)]	Changes your active macro set/book	/macro set 5 /macro book 2
/wait OR <wait X>	[wait time]	Waits for X amount of seconds.	/wait 1 OR /ma "Cure" <t> <wait 1>

Chat and Party/Alliance Commands

Macro Command	Used for	Example
/recast	Displays the recast of a spell or JA	/recast "Provoke"
/pcmd	Performs a party command	/pcmd add "PlayerName"
/acmd	Performs an alliance command	/acmd leader "PlayerName"
/p	Displays a message in party chat	/p Hello Party!
/l	Displays a message in linkshell chat	/l Hello LS!
/echo	Displays a message in chat for yourself	/echo Noone can see this but me!

Targets and Sub-Targets

Several commands require you to specify a target as a parameter to your action (such as /lockon, /target, /magic, and /range), you can use the following placeholders to select targets. Keep in mind when using <t> in a macro, if a person blinks due to changing gear you will lose your target. Using <stpt> or <stal> will prevent the loss of target since it moves up and down your party and alliance list, which does not blink.

Target	Used for	Example
<me>	Sets target of the macro to yourself	/ja "Benediction" <me>
<t>	Sets target of the macro to your current target	/ws "Hexa Strike" <t>
<bt>	Sets target of the macro to the last monster claimed by party	/ma "Stun" <bt>
<ht>	Sets target of macro to a target that is in Call For Help status	/slap <ht>
<ft>	Sets target of macro to your Adventuring Fellow	/ma "Cure" <ft>
<st>	Creates a subtarget for you to choose who to activate your macro on	/ma "Cure" <st>
<stpc>	Creates a subtarget that only selects playable characters	/ma "Raise" <stpc>
<stpt>	Creates a subtarget that only selects players in your party	/ma "Erase" <stpt>
<stal>	Creates a subtarget that only selects players in your alliance	/ma "Cure IV" <stal>
<stnpc>	Creates a subtarget that only selects non-player characters	/ma "Flash" <stnpc>
<lastst>	Sets target of macro to the last selected subtarget	/ma "Silena" <lastst>
<r>	Sets target of macro to the last person to send you a tell	/ma "Cure" <r>
<pet>	Sets target of macro to your pet	/p <pet> is engaging a monster!
<scan>	Sets target of macro to the target your wide scan is following	/ja "Provoke" <scan>
<p0> ~ <p5>	Sets target of macro to the person at that position in your party list (0 being you always)	/ma "Cure V" <p5>
<a10> ~ <a15>	Sets target of macro to the person at that position in the top party in your alliance	/ma "Cure III" <a12>
<a20> ~ <a25>	Sets target of macro to the person at that position in the middle party in your alliance	/ma "Cure IV" <a23>
<focust>	Sets target of macro to the player set as your focus target	/ma "Geo-Regen" <focust>

Informative Displays

You can use some commands to display helpful information to your teammates.

Macro Command	Used for	Example
<hp>	Displays your Current HP / Max HP	/p I have <hp>!
<hpp>	Displays your current HP %	/p I have <hpp> HP remaining!
<mp>	Displays your Current MP / Max MP	/p I have <mp>!
<mpp>	Displays your current MP %	/p I have <mpp> MP remaining!
<tp>	Displays your current TP	/p I have <tp> TP! Ready for skillchain!
<pethpp>	Displays your Pet's HP %	/p My pet is at <pethpp> HP!
<petmpp>	Displays your Pet's MP %	/p My pet is at <petmpp> MP!
<pettp>	Displays your Pet's TP	/p My pet is at <pettp> TP!
<fthpp>	Displays your Adventuring Fellow's HP %	/p My adventuring fellow is at <fthpp> HP remaining!
<call> ~ <call21>	Creates a sound and vibrates controllers for party members to hear/feel	/p Wake up! <call3>
<ncall> ~ <ncall21>	Creates a sound for party members to hear	/p Big move coming up! <ncall13>
<scall> ~ <scall21>	Creates a sound but doesn't vibrate controllers for party members to hear	/p Incoming! <scall5>
<job>, <mjob>, <sjob>	Displays your job, your main job, or your subjob	/p I'm <job>.
<pos>	Displays your current position	/l Help! I need raise at <pos>!
<recast="X">	Displays the recast of a spell or JA	/p My SP is available in <recast="Invincible">.

Equipment Sets

Equipment Sets allow you to equip more than one piece of gear in one macro command. Each character has 100 equipment sets available to them. There are several commands available to help you when creating equipment sets:

• Edit: Edit the selected equipment set.
  • When editing this way, you can place any gear that ANY of your level 99 jobs can wear in the set.
    • This means that if you have WHM and PLD at 99, both WHM and PLD gear will be available to be placed in the equipment set. This allows you to mix and match gear for different lock styles, but beware when making sets for a specific job that you do not use equipment it cannot wear.
  • Selecting Remove piece. for an equipment slot will remove whatever you have equipped in that slot when the equipment set is equipped.
  • Selecting Keep same piece for an equipment slot will not change whatever you have equipped in that slot when the equipment set is equipped.
• Change Name: Modify the name of the equipment set.
  • Keep in mind you need to refer to the equipment set by number when using it in a macro.
• Use Current: Create an equipment set using the gear you are currently wearing
• Style Lock: Style lock your character to the equipment set.
• Equip: Equip the equipment set.
  • This will display any problems with equipping the set (for instance, the current job cannot wear it or a piece of gear is not in your inventory).
  • Using the macro command /equipset 1 echo will also display problems with equipping the set.